Chattanooga XT Channel 1 Lead Wire – P/N 27312

The Chattanooga XT Channel 1 Lead Wire, Part Number 27312, is a replacement patient lead wire designed for the Channel 1 electrotherapy output on compatible Chattanooga Intelect Legend XT systems.

Lead wires are an essential part of an electrotherapy system, carrying the electrical stimulation output from the therapy unit to the electrodes placed on the patient.

If an existing Channel 1 lead wire becomes damaged, worn, intermittent, or no longer provides a reliable connection, Chattanooga P/N 27312 provides the appropriate replacement for compatible equipment.

What Does the Chattanooga 27312 Lead Wire Do?

The 27312 Channel 1 Lead Wire connects the electrotherapy unit’s Channel 1 output to the electrodes used during electrical stimulation treatments.

A properly functioning lead wire is necessary for consistent delivery of the selected electrotherapy waveform to the patient electrodes.

Lead wires can become worn over time from repeated clinical use, bending, pulling, wrapping, and connecting or disconnecting electrodes. A damaged lead wire may result in intermittent output, poor electrode connection, or interruption of treatment.

Designed for Channel 1

Chattanooga uses individual lead wires for each electrotherapy channel.

P/N 27312 is specifically the Channel 1 lead wire.

The corresponding Chattanooga lead wires are:

27312 – Channel 1 Lead Wire
27313 – Channel 2 Lead Wire
27314 – Channel 3 Lead Wire
27315 – Channel 4 Lead Wire

When replacing a lead wire, verify both the therapy unit and the channel number before ordering.

Chattanooga Intelect Legend XT Compatibility

The Chattanooga XT Channel 1 Lead Wire is designed for compatible Intelect Legend XT systems equipped with electrotherapy capability, including applicable stimulation and combination configurations.

It is used as the Channel 1 patient lead connection for electrical stimulation treatments.

Additional Chattanooga Compatibility

P/N 27312 has also been used with compatible Chattanooga electrotherapy systems including:

Intelect Legend XT
Vectra Genisys
Intelect Transport Electrotherapy
Intelect Transport Combination units

Compatibility should always be verified by model when replacing accessories on older Chattanooga therapy equipment.

Color-Coded Lead Wire Design

Chattanooga electrotherapy lead wires use color coding at the connectors to make individual treatment channels easier to identify.

The lead wires were also designed with a rip-stop feature intended to improve durability during regular clinical use.

This is especially helpful in busy physical therapy and rehabilitation environments where patient lead wires are connected, disconnected, wrapped, and stored throughout the treatment day.

When Should an XT Lead Wire Be Replaced?

Consider replacing the Chattanooga XT Channel 1 Lead Wire if you experience:

Intermittent stimulation on Channel 1
Treatment stopping when the wire is moved
Visible cuts or damage to the lead wire
Loose or damaged connectors
Difficulty maintaining electrode connection
Channel 1 lead-wire error or connection problems
Significant wear from repeated clinical use

When troubleshooting an electrotherapy output problem, swapping a known-good lead wire can also help determine whether the problem is with the lead wire, electrodes, or the therapy unit itself.

Product Details

Manufacturer: Chattanooga
Part Number: 27312
Product Type: Electrotherapy Patient Lead Wire
Channel: Channel 1
Primary Application: Electrical Stimulation
Primary Compatibility: Intelect Legend XT
Additional Compatibility: Vectra Genisys and Intelect Transport systems
Quantity: 1 Lead Wire
Primary Keyword: Chattanooga XT Channel 1 Lead Wire

Need a Different Channel?

Each electrotherapy channel uses its corresponding Chattanooga lead wire.

If you need another channel, use:

27312 – Channel 1
27313 – Channel 2
27314 – Channel 3
27315 – Channel 4

Selecting the correct channel-specific replacement helps keep lead wires organized and makes it easier to identify each electrotherapy output during treatment.

(ALL CHANNELS ARE INTERCHANGEABLE / CHANNEL 1 CAN FIT INTO ANY SLOT)

Need Help Identifying the Correct Chattanooga Lead Wire?

If you are unsure which replacement lead wire is required for your Chattanooga therapy unit, contact us with the model and serial number of your equipment.

We can help determine the correct Chattanooga lead wire or other replacement accessory for your Intelect Legend XT, Vectra Genisys, or Intelect Transport system.

Made for the following machines:

Model numbers:

2760 (intelect legend XT 2-Channel Combo)
2763 (intelect legend XT 2-Channel Electrotherapy)
2786 (Intelect legend XT 4-Channel Electrotherapy)
2788 (Intelect legend XT 4-Channel Combo)
2782 (Intelect legend Transport Ultrasound)
2738 (Intelect legend Transport Combo)
2783 (Intelect legend Transport 2-Channel Electrotherapy)

Manual for Hydrocollator Heating Unit

27312 – channel 1

Chattanooga XT Channel 1 Lead Wire – P/N 27312