Intelect Legend Channel 1 & 2 Lead Wire – Chattanooga 12213

The Intelect Legend Channel 1 & 2 Lead Wire, Chattanooga Part Number 12213, is a replacement electrotherapy patient lead assembly designed for the older Chattanooga Intelect Legend Series of stimulation and combination therapy units.

Unlike the later Intelect Legend XT system, which uses individual channel-specific lead wires, the original Intelect Legend uses P/N 12213 for Channels 1 and 2.

The lead assembly provides the connection between the electrotherapy system and the patient electrodes during electrical stimulation treatments.

Chattanooga 12213 – Channels 1 & 2

Chattanooga P/N 12213 is specifically the patient lead assembly for:

Channel 1 and Channel 2

on compatible older Intelect Legend therapy systems.

The corresponding lead assembly for Channels 3 and 4 is:

12214 – Intelect Legend Channel 3 & 4 Lead Wire

For a 2-channel Intelect Legend system, 12213 provides the required patient leads for Channels 1 and 2.

For compatible 4-channel systems, both 12213 and 12214 may be required to provide lead connections for all four electrotherapy channels.

Compatible Intelect Legend Models

The Intelect Legend Channel 1 & 2 Lead Wire is designed for older Chattanooga Intelect Legend systems, including:

INTCB – Intelect Legend 2-Channel Combination
INT002 – Intelect Legend 2-Channel Stimulator
7550 – Intelect Legend Series
7560 – Intelect Legend Series

P/N 12213 has also been associated with certain older Chattanooga Forte therapy systems. Compatibility with older equipment should be verified by model and connector style before ordering.

NOT for Intelect Legend XT

This compatibility distinction is extremely important.

Chattanooga 12213 does NOT replace the lead wires used on the Intelect Legend XT.

The Intelect Legend XT uses a different style of individual channel lead wire:

27312 – XT Channel 1 Lead Wire
27313 – XT Channel 2 Lead Wire
27314 – XT Channel 3 Lead Wire
27315 – XT Channel 4 Lead Wire

If your therapy unit says Intelect Legend XT, do not order P/N 12213.

NOT for Intelect Legend 2

The 12213 lead wire is also not designed for the newer Chattanooga Intelect Legend 2 therapy system.

The original Intelect Legend, Intelect Legend XT, and Intelect Legend 2 are different generations of Chattanooga therapy equipment and use different patient lead-wire systems.

Always verify the exact model before ordering.

How to Identify the Correct 12213 Lead Wire

The Chattanooga 12213 lead wire uses a 4-pin DIN-style male connector at the therapy-unit connection.

The lead assembly is approximately:

120 inches / 10 feet long

and provides the patient connections required for Channels 1 and 2.

If the connector on your existing therapy unit does not match the 4-pin DIN connection, contact us before ordering.

What Does the Intelect Legend Lead Wire Do?

The Intelect Legend Channel 1 & 2 Lead Wire carries electrical stimulation from the therapy unit to the patient electrodes.

During treatment, the Intelect Legend generates the selected electrotherapy waveform. The lead wire then provides the electrical connection between the therapy unit and the electrodes placed on the patient.

A damaged or deteriorated lead wire can interfere with that connection and may cause inconsistent treatment output.

Signs the 12213 Lead Wire May Need Replacement

Consider inspecting or replacing the Chattanooga 12213 lead wire if you experience:

Intermittent stimulation
Loss of output on Channel 1 or Channel 2
Treatment stopping when the cable is moved
Visible cuts or deterioration in the cable
Damaged patient connectors
Damaged or loose 4-pin DIN connector
Poor electrode connection
Stimulation that cuts in and out during treatment
Lead-wire or electrode connection errors

Older Intelect Legend systems may still function properly even though the original lead wires have deteriorated from years of clinical use.

Replacing a worn lead assembly can often restore a dependable connection without replacing the therapy unit itself.

Original Intelect Legend vs. Legend XT Lead Wires

It is easy to confuse these parts because Chattanooga used the Intelect Legend name across multiple generations of equipment.

Original Intelect Legend

Uses:

12213 – Channels 1 & 2
12214 – Channels 3 & 4

These leads use the older 4-pin DIN connector system. (These are the leads for the Intelect Legend model of units, beige with 2 rows of buttons)

Intelect Legend XT

Uses:

27312 – Channel 1
27313 – Channel 2
27314 – Channel 3
27315 – Channel 4

Each XT channel has its own individual lead wire. (These item codes are for the Intelect XT and NOT for the Legend model)

These lead-wire families are not interchangeable.

Product Specifications

Manufacturer: Chattanooga
Part Number: 12213
Product: Electrotherapy Patient Lead Wire
Channels: Channels 1 & 2
Connector: 4-Pin DIN
Lead Length: Approximately 120″ / 10 ft
Primary Compatibility: Older Intelect Legend Series
Compatible Models: 7550, 7560, INT002, INTCB
Application: Electrotherapy / Electrical Stimulation
Quantity: 1 Channels 1 & 2 Lead Assembly
Legend XT Compatible: No
Legend 2 Compatible: No
Primary Keyword: Intelect Legend Channel 1 & 2 Lead Wire

Need Channels 3 & 4?

For compatible four-channel Intelect Legend systems, Chattanooga uses a separate lead assembly for the additional channels.

12213 – Channels 1 & 2 Lead Wire

12214 – Channels 3 & 4 Lead Wire

Verify which lead assembly is required before ordering.

Unsure Which Intelect Legend You Have?

Chattanooga has produced several generations of Intelect Legend therapy equipment, and the lead wires are not interchangeable between every generation.

If you are unsure whether Chattanooga 12213 fits your unit, contact us with the model number, serial number, or a photo of the lead-wire connection on the therapy unit (text to 423-870-9030). We can help identify whether you need the original 12213 Intelect Legend lead wire or one of the later Intelect Legend XT replacement lead wires.

intelect legend manual for reference

Intelect legend leads

Chattanooga Intelect Legend Channel 1 & 2 Lead Wire – 12213